Where can i watch Black Sawn for free?
Q. ok can someone give me a link where i can watch it for free & i dont wanna download it or unlock the website by taking quizes.
Asked by - Thu Jun 30 15:37:55 2011 - Drama - 1 Answers - Comments

What's the difference between a sawn-off shotgun and a scattergun? ?
Q. Is there a difference? Or is one just a nickname of the other?
Asked by keykeygurl - Sat Aug 30 02:59:28 2008 - Other - Sports - 3 Answers - Comments

A. A scattergun is just another name for a shotgun. The difference between a sawed off shotgun and regular shotgun is that a sawed off shotgun is shorter and therefore easier to maneuver and conceal. Also, since its shorter, a sawed off shotgun is more effective at short range (although shotguns are pretty good at close range to begin with).
Answered by Kid A - Sat Aug 30 03:03:12 2008

Why is it that when you saw a bolt down, only the end that has been sawn rusts?
Q. Is there anyway I can prevent this? There have been various bolts that I have sawn down to fit on my bicycles, but I've noticed rust appearing very quickly when it didn't prior to being cut.
Asked by Liam - Mon Oct 6 15:05:05 2008 - Do It Yourself (DIY) - 7 Answers - Comments

A. The bolt is either hot-dip galvanized or electroplate galvanized. The hot dip bolt is dipped into a vat of molten zinc which coats the surface of the bolt. Electroplated are dipped in a solution which is charged and causes zinc atoms to plate the bolt. Both methods protect the bolt from the outside, but do nothing for the steel core of the bolt. This normally is not an issue, unless you expose the core by cutting it as you have discovered. One way to keep the rust in check is to paint the end of the bolt after you cut it. Hope this helps.
Answered by woodtick314 - Mon Oct 6 15:17:02 2008

If magic were real, would you be sawn in half and/or decapitated?
Q. If there was no pain or blood and you would be back to normal afterwards, would you be sawn in half or decapitated for real? Would you swap your body or legs with someone else? What else would you be willing to try? And would you rather be the sawer or the sawee?
Asked by The Joker - Mon Jan 22 17:45:10 2007 - Other - Arts & Humanities - 4 Answers - Comments

A. I'll try everyting once.
Answered by vim108 - Mon Jan 22 17:58:14 2007

Does anyone how to get sawn in half?
Q. I live in merthyr and wants to be sawn in half
Asked by - Fri Mar 18 14:51:23 2011 - Do It Yourself (DIY) - 3 Answers - Comments

A. James Bond: Do you expect me to talk? Auric Goldfinger: No, Mr. Bond. I expect you to die.
Answered by JOHN L - Fri Mar 18 15:19:35 2011

Sawn of shotgun. what is the point and the benefits of this?
Q. Yeah sawing off the end of a shot gun. Why?
Asked by ~Pr*nce~ - Sun Aug 16 22:23:48 2009 - Hunting - 10 Answers - Comments

A. The really short ones you always see in Mafia movies are easier to conceal but are still powerful. If by sawed-off you mean you cut it from say 26 inches to 20, it is just so it will be quicker to swing and wouldn't get caught in thick brush.
Answered by Larry - Mon Aug 17 16:28:18 2009

Would a handgun that fires a shotshell be considered a sawn-off?
Q. i'm not considering a .410, and I am aware of the Taurus Judge and Bond arms derringer. Is it also a sawnoff if it just fires a shell through a smooth bore barrel?
Asked by Merlin - Wed Sep 29 01:20:43 2010 - Law Enforcement & Police - 1 Answers - Comments

A. Sawn off is sawn off, so if it isn't sawn off, it isn't a sawn off. However, a pistol cannot be a shotgun, as it is a pistol. A shotgun, cannot be a pistol, because it is a shotgun. If you make something that looks like a pistol, but fires shotgun rounds, then it is a shotgun.
Answered by Mike - Wed Sep 29 01:32:02 2010

How to stain rough sawn cedar bird feeder.?
Q. I made a bird feeder from rough sawn cedar. I don't think the birds would mind a few flaws, but I would like it to look nice from the kitchen nook. Any suggestions on how to apply the stain. I don't have a sprayer. I intend to finish it with exterior spar urethane. Since it is rough sawn, can you skip sanding between coats?
Asked by greydoc6 - Fri Dec 5 11:29:26 2008 - Do It Yourself (DIY) - 3 Answers - Comments

A. use a brush no sanding needed buy the spray shellac it will be easier to apply
Answered by pickmefirstplz - Fri Dec 5 12:28:20 2008

is there any difference between a sawn off shotgun and a shotgun?
Q. is there performance difference or is it just the length
Asked by andi.wilding - Tue Jun 5 15:03:56 2007 - Hunting - 17 Answers - Comments

A. I will agree that a shorter shotgun has a better spreading effect at the shorter ranges. I blew a basketball sized hole through plywood with a 2 barrel sawed off-shotgun.
Answered by trigunmarksman - Tue Jun 5 15:24:41 2007

What does it mean to be "sawn asunder"?
Q. In the early 20th century, 2 men disobeyed the Empress Dowager of China and were "sawn asunder."
Asked by evil_fruit_girl - Tue Nov 3 01:08:54 2009 - Words & Wordplay - 2 Answers - Comments

A. The were cut in half using something like a saw.
Answered by - Tue Nov 3 01:15:26 2009

On black ops is it bad to sawn kill?
Q. On black ops in your opinion what do you think about spawing.
Asked by - Tue Oct 11 21:20:59 2011 - PC - 1 Answers - Comments

A. its dirty
Answered by Wormy - Tue Oct 11 21:48:52 2011

what is timber thats sawn to be triangle edged called?
Q. so for example the edge would be a right angle triangle say 100mm x 100mm and 141mm for the hyp. and sold in lengths of say 3m, cant find it anywhere on the internet, If not how can i cut a 100mm x 100mm x 3m square edged timber piece into two right angle triangle edged beams (as above). Thanks all who answer
Asked by - Thu Jan 20 01:30:07 2011 - Decorating & Remodeling - 3 Answers - Comments

A. a champer is a piece of wood cut to a 45 length wise...
Answered by Dan the brick man - Thu Jan 20 06:40:57 2011

I want to be sawn in half?
Q. Ever since I was a little boy I've loved the Sawing a Lady in Half trick, its my favorite. I always think when I'm watching the trick on telly that it should be a lady in the box being sawn in half (even if its a female magician). But now in recent years I've had the interest of being sawn in half myself. What's your view?
Asked by jon h - Tue Jul 26 17:02:22 2011 - Other - Entertainment - 2 Answers - Comments

A. Like you l have always loved the trick since l was a kid. If you would like to be sawn in half, l say go for it. Personally l would always prefer to be the magician who does the sawing.
Answered by magicman - Mon Aug 1 11:25:21 2011

Is TJ Sawn Wine and Boones Farm wine still being sold?
Q. I used to drink these cheap wines in the 1970's it seems most people today look down on them but if I remember right TJ Swan was a fairly good tasting wine for a wine with no cork and a screw lid. Okay, I know the laughs will probably start because they do in person, but still I would like to know if it is still made and sold. I have not seen any lately.
Asked by Rebel U - Sat Oct 4 07:50:56 2008 - Beer, Wine & Spirits - 2 Answers - Comments

A. Yes. You can buy Boone's Farm wine Tickle Pink and Strawberry HIll at convenience stores and grocery stores. TJ Swan wine can be purchased at the local grocer also. I haven't heard of those in a long time, other than when I saw Boone's Farm at the local grocer. I had laughed because I didn't think anyone sold those anymore. I used to drink TJ Swan Stepping Out, because i was too young to afford the more expensive stuff. LOL !!!
Answered by cajntex - Sat Oct 4 07:54:32 2008

About staining & finishing circle sawn fir flooring...?
Q. We have laid some circle sawn fir flooring and are sanding today. After staining, to get the best results how long should we wait to put the finish on? How long after applying the finish do we need to wait before walking on it? We are planning to use either a satin or a semi-gloss finish.
Asked by Christi - Wed May 27 12:00:49 2009 - Decorating & Remodeling - 1 Answers - Comments

A. at least 48 hrs. for the stain to penetrate. then test a spot with finish to see if the stain is dry. finish takes about 7 days to fully cure.
Answered by karen h - Wed May 27 12:21:40 2009

Do you know some pc games where you have sawn-off shotgun?
Q. I know that a sawn-off shotgun is in call of juarez, stalker, gta,.. Is there in any other game?
Asked by highlander - Sat Jun 20 15:06:37 2009 - Video & Online Games - 1 Answers - Comments

A. Doom has one.
Answered by ben dover - Sat Jun 20 15:33:26 2009

is there a safe way to remove paint from staind rough sawn cedar wood panels without removing the stain?
Q.
Asked by t*monc - Sun Mar 30 15:24:48 2008 - Maintenance & Repairs - 3 Answers - Comments

A. Try Murphy's Oil and Wood Soap...it is great for cleaning wood, and leaving it looking nice with a shine.
Answered by music is my passion - Sun Mar 30 15:30:30 2008

Which country invented the Sawn-off shotgun?
Q. Or at least was the closest to inventing it, also who invented the original double barrel? When was the earliest case of the sawn-off shotguns being used as firearms and by who?
Asked by - Thu Sep 23 19:14:42 2010 - Military - 3 Answers - Comments

A. Hillbilly Country, U.S.A
Answered by - Thu Sep 23 20:03:35 2010

what is the purpose of a sawn off shotgun?
Q. i know what a shot gun is but why use a sawn off instead of a regular one?
Asked by Steffy - Wed Mar 28 19:09:02 2007 - Hunting - 33 Answers - Comments

A. Puerly for a mistermena,, Much easyer to concel under your coat ets and for that perpous there ilegal, anything under 24" Is against the law in the uk
Answered by Brad - Sun Apr 1 11:07:08 2007

How to calculate timber recovery ? Logs some use 50% recovery and Sawn timber 75% recovery.?
Q. Anybody can advise me how to derive those recovery percentage?
Asked by razi_abdrahman - Tue Jun 26 23:53:27 2007 - Do It Yourself (DIY) - 1 Answers - Comments

A. I do not understand the question? Must be the sound of the sawmill cutting the boards as per customer request.
Answered by Talon - Wed Jun 27 02:10:34 2007